Reamp and DI Notes

Radial ProRMP

Observed behavior:

• Putting the ProRMP directly on the Alesis AUX SEND reduced the signal too much.
• It required all sends near maximum, which is undesirable.

Current recommendation:

• Do not make the ProRMP part of the default AUX SEND loop.
• Treat it as a DAW/TASCAM reamp utility unless a line-level gain staging solution is added.

Better candidate uses:

TASCAM line output -> ProRMP -> guitar pedal input -> amp/pedal return/capture path

PYLE-PRO PDC22 dual DI

Useful because it can process two channels, not merely one mono signal.

Candidate uses:

• stereo L/R tap
• A/B chain tap
• Privia direct-to-TASCAM tap
• bass/guitar direct split where isolation is useful

General rule

Use DI boxes to convert instrument/unbalanced sources into interface/mixer-friendly signals. Use reamp boxes in the opposite direction: interface/line-level output back down to pedal/instrument-level expectations.